Need a part number for your four-wheel-drive B8200HST-DP before the dealer reopens? This 189-page parts catalog (OEM #11065) is organized to get you there fast. The bulk of it, 185 pages, runs exploded-view parts lists across every assembly: crankcase and cylinder head, the hydrostatic transmission, hydraulic piping, and the front differential specific to the DP model. hydraulic parts diagrams are included. Cross-reference tables map country codes against variant configurations, so you can match your exact build without flipping through paper. Every diagram links to part numbers, with component weights noted where they help you confirm the right piece: crankcase assembly at 26.5 kgf, cylinder head at 9 kgf, crankshaft at 8 kgf. Bookmarked by system and keyword-searchable. Open the HST section, copy the number, and place your order tonight from any device.
What's Inside This Kubota B8200HST-DP Parts Manual
| System | Pages |
|---|---|
| Crankcase | 5-6 |
| Oil Pan | 7-8 |
| Cylinder Head | 9-10 |
| Gear Case | 11-12 |
| Main Bearing Case | 13-14 |
| Cylinder Head Cover | 15-16 |
| Inlet Manifold | 17-18 |
| Valve/Rocker Arm | 19-20 |
| Camshaft | 21-22 |
| Engine Stop Lever | 23-24 |
| Gear Pump | 25-26 |
| Crankshaft/Piston | 27-28 |
| Flywheel | 29-30 |
| Nozzle Holder | 31-32 |
| Speed Control Plate | 33-34 |
| Governor | 35-36 |
| Water Flange | 37-38 |
| Fuel Camshaft | 39-40 |
| Water Pump | 41-42 |
| Gear Pump [Section Parts] | 43-44 |
| Nozzle Holder [Section Parts] | 45-46 |
| Injection Pump [Section Parts] | 47-48 |
| Starter [Section Parts] | 49-50 |
| Dynamo [A] [Section Parts] | 51-52 |
| Transmission Case and Differential Case | 53-54 |
| Mid P.T.O | 55-56 |
| Cover | 57-58 |
| Axle Case | 59-60 |
| Clutch | 61-62 |
| 1st Shaft and 2nd Shaft | 63-64 |
| 3rd Shaft | 65-66 |
| 4th Shaft | 67-68 |
| Front Drive Shaft and 6th Shaft | 69-70 |
| 7th Shaft and PTO Shaft | 71-72 |
| Rear Differential | 73-74 |
| Rear Axle,And Rear Wheel (8.3-24) [B8200Hst-Ep] [A] | 75-76 |
| Rear Axle,And Rear Wheel (12.4-16) | 77-78 |
| Rear Wheel (13.6-16) [B8200Hst-Ept,B8200Hst-Dpt] | 79-80 |
| Speed Change Fork | 81-82 |
| Front Drive Fork | 83-84 |
| Rotary Speed Change Fork | 85-86 |
| Brake | 87-88 |
| Hitch | 89-90 |
| Hydrostatic Transmission | 91-92 |
| Case Cover and Lift Arm | 93-94 |
| Control Valve | 95-96 |
| Hydraulic Piping | 97-98 |
| Hydraulic Block | 99-100 |
| Steering | 101-102 |
| Speed Change Lever 1 | 103-104 |
| Speed Change Lever 2 | 105-106 |
| Speed Change 1 | 107-108 |
| Speed Change 2 | 109-110 |
| Clutch Pedal and Brake Pedal | 111-112 |
| Diff.Lock Pedal | 113-114 |
| Release Lever | 115-116 |
| Name Plate | 117-118 |
| Clutch Housing | 119-120 |
| Step and Frame | 121-122 |
| Fender | 123-124 |
| Bonnet Bracket | 125-126 |
| Dustproof Net | 127-128 |
| Seat | 129-130 |
| Muffler and Muffler Pipe | 131-132 |
| Fuel Tank | 133-134 |
| Decompress Wire and Engine Stop Wire | 135-136 |
| Bonnet and Panel | 137-138 |
| Skirt | 139-140 |
| Battery | 141-142 |
| Electrical System | 143-145 |
| Head Lamp and Flasher Lamp | 146-147 |
| Air Cleaner | 148-149 |
| Fuel Filter | 150-151 |
| Radiator | 152-153 |
| Front Axle Arm [B8200Hst-Dp] | 154-155 |
| Bevel Gear Case [B8200Hst-Dp] | 156-157 |
| Front Axle Case [B8200Hst-Dp] | 158-159 |
| Knuckle Arm [B8200Hst-Dp] | 160-161 |
| Front Differential [B8200Hst-Dp] | 162-163 |
| Bevel Gear [B8200Hst-Dp] | 164-165 |
| Drive Shaft [B8200Hst-Dp] | 166-167 |
| Front Wheel (6-12) [B8200Hst-Dp] | 168-169 |
| Front Wheel (24 X 8.50-12) [B8200Hst-Dpt] | 170-171 |
| Lift Rod | 172-173 |
| Check Chain and Bracket | 174-175 |
| Front Weight Bracket | 176-177 |
| HST [Section Parts] | 178-187 |
| Control Valve [Section Parts] | 183-185 |
| Accessories and Service Parts | 188-189 |
Quick Reference Specifications
| Specification | Value | Page |
|---|---|---|
| Assy Crankcase Weight | 26.5 kgf | p. 6 |
| Oil Pan Weight | 1.1 kgf | p. 8 |
| Assy Cylinder Head Weight | 9 kgf | p. 10 |
| Cartridge, Oil Filter Weight | 0.35 kgf | p. 12 |
| Assy Crankshaft Weight | 8 kgf | p. 28 |
| Rear Plate End Weight | 5.9 kgf | p. 30 |
| Nozzle Holder Washer Adjusting Thickness | 1.00 | p. 32 |
| Assy Starter Yoke Weight | 1.42 kgf | p. 50 |
| Case, Differential Weight | 12 kgf | p. 54 |
| Clutch Housing Weight | 22.5 kgf | p. 120 |
| Battery Weight | 10.4 kgf | p. 142 |
| Assy Radiator Weight | 6 kgf | p. 153 |
Kubota B8200HST-DP Common Problems This Manual Covers
Kubota B8200HST-DP front hub or knuckle area leaking, need correct seal part numbers p. 160
Open the Knuckle Arm exploded view on page 160 and cross-reference the Front Axle Arm diagram on page 154. Both sections list individual seal and O-ring part numbers for the DP front axle assembly. Confirm your serial number matches the B8200HST-DP variant before ordering, as seal kits differ between 2WD and 4WD configurations.
Manual Section: Knuckle Arm [B8200Hst-Dp]Can't identify correct hydraulic cylinder seal or O-ring part numbers for loader attachment p. 97
Check the Hydraulic Piping exploded view starting on page 97, then cross-reference the Hydraulic Block section on page 99. Both sections list individual O-ring and seal part numbers by position. Verify each part number against the Parts Number List before ordering, as cylinder bore diameter determines which seal kit applies.
Manual Section: Hydraulic PipingMid PTO components hard to source, need to verify exact part numbers before calling dealer p. 55
Pull up the Mid P.T.O. exploded view on page 55. Each component, including shaft seals, snap rings, and drive gears, carries its own part number in the diagram. Write down the full part number string exactly as shown, including any suffix letters, since substitutions from non-DP models will not interchange correctly.
Manual Section: Mid P.T.OFront differential seal kit needed, unsure which parts belong to DP variant p. 162
Reference the Front Differential section on page 162, specific to the B8200HST-DP, for all internal seals, bearings, and O-rings by item number. Cross-reference the Bevel Gear Case diagram on page 156 to spot any additional seals in the housing. The DP designation on page 162 confirms these parts do not apply to non-4WD variants.
Manual Section: Front Differential [B8200Hst-Dp]Hydrostatic transmission seal or internal parts needed, can't match part numbers to HST assembly p. 178
Start with the Hydrostatic Transmission overview on page 91, then move to the HST Section Parts breakdown beginning on page 178, which runs through page 187 and provides the most detailed sub-component part numbers. The Control Valve Section Parts on page 183 covers valve body seals separately. Confirm part numbers against the index before placing an order, as HST internals are serial-number sensitive.
Manual Section: HST [Section Parts]Bevel gear case or drive shaft seals needed for front axle, part numbers unclear in diagram p. 156
Compare the Bevel Gear Case exploded view on page 156 with the Drive Shaft section on page 166; each lists seal and bearing part numbers individually. Both are DP-specific, so confirm the B8200HST-DP designation in the parts list before ordering. If the leak source is the axle housing rather than the gear case, cross-reference the Front Axle Case diagram on page 158.
Manual Section: Bevel Gear Case [B8200Hst-Dp]Frequently Asked Questions
How quickly can I access this Kubota B8200HST-DP manual after buying?
Checkout delivers the 189-page searchable PDF instantly. Open it on a laptop, tablet, or phone and take it straight to the shop floor.
Am I able to print pages from this Kubota B8200HST-DP manual?
Yes. Print as many copies as you like, with no restrictions. Plenty of mechanics print just the section they need before heading to the bench.
Are there hydraulic schematics in this Kubota B8200HST-DP manual?
This is a parts catalog, so it shows exploded parts diagrams rather than circuit schematics. It includes detailed exploded views of the hydraulic components — pump, control valve, cylinder, and oil lines — with OEM part numbers, not wiring-style circuit diagrams.
Document Quality
This document is a mixed PDF, featuring native digital text for the parts lists and scanned images for the diagrams. You can search and copy text from the parts list pages, where the text is crisp and easy to read. The diagrams are clear and their labels are readable, but they are raster images and will show pixelation if zoomed in closely. All pages are clean, free of scan artifacts or marks, and page 188 explicitly notes "IMAGE NOT AVAILABLE" as a filler.
Reviews
There are no reviews yet.