Case 585G 586G 588G Service Repair Manual [Forklift]

Availability: Instant Download
Requirements: PDF Reader
Size: 280.816 Mb
Language: English
Format: PDF
Payment method:
Price: 59.95 $

Description

Factory Service Repair Manual 7-14851 For Case 585G / 586G / 588G Forklifts. Tons of illustrations, instructions, diagrams for step by step remove and install, assembly and disassembly, service, maintenance, inspection, repair, troubleshooting. Digital PDF format with all its advantages.  In this version included Electrical Schematics, Hydraulic Schematics.

PDF Manual:

  • Instant download – You will receive the link for download on your email immediately after payment.
  • Lifetime PDF and access to download (by request)
  • Compatible with Windows, Mac, IOS, Android and other systems
  • Searchable Text and Built-in index for instant information search
  • Bookmarks
  • Printable – pages or entire manual
  • Zoomable – detailed exploded diagrams, picture

Models

585G
586G
588G

Contents

  • General
    Section Index – General
    Standard Torque Specifications
    Fluids and Lubricants
    Loctite Product Chart
  • Engines
    Section Index – Engines
    Engine Removal and Installation
    Stall Test
  • Electrical
    Section Index – Electrical
    Removal and Installation of Electrical Components
    Electrical Specifications and Troubleshooting
    Batteries
    Starter Motor – Denso
    Instrument Cluster
    Alternator
  • Steering
    Section Index – Steering
    Removal and Installation of Steering Components
    Steering Specifications, Pressure Checks and Troubleshooting
    Steering Control Valve|
    Steering Cylinders
    Steering Axle – Two Wheel Drive
    Steering Axle ¦ Four Wheel Drive
  • Power Train
    Section Index – Power Train
    Removal and Installation of Power Train Components
    Transmission Specifications, Pressure Checks and Troubleshooting – Forklift Early
    Production
    Transmission Specifications, Pressure Checks and Troubleshooting – Forklift Late
    Production
    Wheels and Tires
    Drive Axle and Planetaries
    Standard (Carraro) Transmission
  • Brakes
    Section Index – Brakes
    Removal and Installation of Brake Components
    Master Cylinder
  • Hydraulics
    Section Index – Hydraulics
    Removal and Installation of Hydraulic Components
    Hydraulic Specifications, Troubleshooting, and Pressure Checks
    Cleaning the Hydraulic System
    Hydraulic Pump
    Control Valve
    Flow Control Priority Valve
    Cylinders
  • Mounted Equipment
    Section Index – Mounted Equipment
    Pedals and Levers
    ROPS Canopy
    Seat and Seat Belts
    Forklift Mast
  • Hydraulic and Electrical Schematic Foldout

Example:

To assemble the clutch pack, start with the gear on the bench. Install the thrust plate so that the reference mark on top of the plate made during disassembly is facing towards the gear.
STEP 149
the steel disc towards the gear followed by one friction disc with the reference mark on top towards the gear. NOTE: If you will be using new friction discs, soak the friction discs in clean transmission oil for a t least an hour before assembly. If you are using the old friction discs, make sure that the friction surfaces are coated with transmission oil before assembly
Install one steel disc with reference mark on top of the steel disc towards the gear.
STEP 151
Repeat steps 149 and 150 until all the clutch discs are installed. The assembled clutch pack must contain seven steel discs and six friction discs.
STEP 152
Make sure that the tabs with reference marks on all the steel discs are aligned with each other. Hold the clutch pack together so that the parts do not move and rotate the clutch pack so that the clutch discs are down. Put the clutch pack on the clutch housing as shown so that the tabs with the reference marks on the steel discs are almost ready to start into the slot in the clutch housing with the reference mark.