Every assembly on the B6200D is broken down across 198 pages of exploded views, OEM part numbers, and weight specs. You get 90 pages of parts lists spanning engine, drivetrain, hydraulics, electrical, chassis, and cab systems, plus hydraulic component diagrams for pump and control valve assemblies. Interchangeability codes show at a glance whether a part crosses serial number ranges. The country code table flags regional variants so you order the right version. Factory weight data is included throughout: cylinder head at 9.5 kgf, piston at 0.32 kgf, camshaft at 1.045 kgf. Real OEM data, not aftermarket guesswork from a forum post. Bookmarked by system and keyword-searchable, so pull it up on a tablet next to the machine and grab the right number before calling the parts counter.
What's Inside This Kubota B6200D Parts Manual
| System | Pages | Key Topics |
|---|---|---|
| Crankcase | 5-8 | Comp.Crankcase, Plug, Cap, Sealing |
| Oil Pan | 9-10 | - |
| Cylinder Head | 11-12 | - |
| Gear Case | 13-16 | - |
| Main Bearing Case | 17-18 | - |
| Cylinder Head Cover | 19-20 | - |
| Manifold | 21-22 | - |
| Valve/Rocker Arm | 23-24 | - |
| Camshaft | 25-26 | - |
| Piston/Crankshaft | 27-28 | - |
| Flywheel | 29-30 | - |
| Injection Pump | 31-32 | - |
| Nozzle Holder | 33-34 | - |
| Engine Stop Lever | 35-36 | - |
| Speed Control Plate | 37-38 | - |
| Governor | 39-40 | - |
| Hydraulic Pump | 41-42 | - |
| Dynamo | 43-46 | - |
| Water Flange | 47-48 | - |
| Water Pump | 49-50 | - |
| Injection Pump [Section Parts] | 51-52 | - |
| Nozzle Holder [Section Parts] | 53-54 | - |
| Dynamo [Section Parts] | 55-58 | - |
| Dynamo [Section Parts] | 195-196 | - |
| Hydraulic Pump [Section Parts] | 59-60 | - |
| Transmission Case | 61-62 | - |
| PTO Cover | 63-64 | - |
| Cover | 65-66 | - |
| Case Cover | 67-68 | - |
| Rear Axle Case | 69-70 | - |
| Clutch Rod | 71-72 | - |
| Clutch | 73-74 | - |
| 2Nd Shaft | 75-76 | - |
| 3Rd Shaft | 77-78 | - |
| 4Th Shaft,5Th Shaft | 79-80 | - |
| Spiral Bevel Shaft | 81-82 | - |
| PTO Shaft | 83-84 | - |
| Reverse Shaft | 85-86 | - |
| Rear Differential | 87-88 | - |
| Rear Axle | 89-90 | - |
| Rear Wheel (7-16) | 91-92 | - |
| Rear Wheel (8-16) | 93-94 | - |
| Rear Wheel (29 X 12.00-15) | 95-96 | - |
| Rear Wheel Hub | 97-98 | - |
| Speed Change Fork | 99-100 | - |
| Main Speed Change | 101-102 | - |
| Aux. Speed Change | 103-104 | - |
| Rotary Speed Change Fork | 105-106 | - |
| Brake | 107-108 | - |
| Hydraulic Pipe | 109-110 | - |
| Hydraulic Block | 111-112 | - |
| Hydraulic 2 | 113-114 | - |
| Steering | 115-116 | - |
| Speed Change Lever | 117-118 | - |
| Brake Rod | 119-120 | - |
| Pedal | 121-122 | - |
| Release Rod | 123-124 | - |
| Seat | 125-126 | - |
| Label | 127-128 | - |
| Clutch Housing/Step/Starter | 129-130 | - |
| Front Axle Frame | 131-132 | - |
| Radiator | 133-134 | - |
| Fender | 135-136 | - |
| Hood | 137-138 | - |
| Battery | 139-140 | - |
| Muffler and Muffler Pipe [A],[Ca] | 141-142 | - |
| Fuel Tank | 143-144 | - |
| Fuel Pipe | 145-146 | - |
| Fuel Filter | 147-148 | - |
| Panel | 149-150 | - |
| Panel Switch | 151-152 | - |
| Decompress Wire and Engine Stop Wire | 153-154 | - |
| Flasher Light/Tail Light/Head Lamp | 155-156 | - |
| Air Cleaner | 157-158 | - |
| Front Axle Case | 159-160 | - |
| Front Gear Case | 161-162 | - |
| Knuckle Arm | 163-164 | - |
| Front Differential | 165-166 | - |
| Front Wheel Hub | 167-168 | - |
| Drive Shaft | 169-170 | - |
| Front Wheel (6-12B) B6200D-Gp-[A][Ca], B7200D-P-[A][Au] | 171-172 | - |
| Front Wheel (5-12) B6200D-P-[A] | 173-174 | - |
| Front Wheel (20.5 X 8.00-10) | 175-176 | - |
| 3-Point Linkage | 177-178 | - |
| Dynamo 1 [Option] | 179-180 | - |
| Dynamo 2 [Option] | 181-182 | - |
| Hydraulic Outlet [Option] | 183-184 | - |
| Horizon Muffler [Option] | 185-186 | - |
| Working Light [Option] | 187-188 | - |
| Flange F.Pto [Option] | 189-190 | - |
| Control Valve [Section Parts] | 191-192 | - |
| Starter [Section Parts] | 193-194 | - |
| Accessories and Service Parts | 198-198 | - |
Quick Reference Specifications
| Specification | Value | Page |
|---|---|---|
| OIL PAN weight | 1.1 kgf | p. 10 |
| CYLINDER HEAD weight | 9.5 kgf | p. 12 |
| MAIN BEARING CASE weight | 0.8 kgf | p. 18 |
| CAMSHAFT weight | 1.045 kgf | p. 26 |
| PISTON weight | 0.32 kgf | p. 28 |
| INJECTION PUMP weight | 2.1 kgf | p. 32 |
| DYNAMO weight | 1.66 kgf | p. 44 |
| REAR WHEEL tire size | 7-16 | p. 92 |
| FRONT WHEEL tire size | 6-12B | p. 172 |
| WASHER,ADJUSTING thickness | 1.00MM | p. 54 |
| 2ND SHAFT GEAR teeth | 29T | p. 76 |
| REAR DIFFERENTIAL ASSY GEAR,BEVEL ratio | 6-37T | p. 88 |
Kubota B6200D Common Problems This Manual Covers
Need replacement Kubota B6200D front steering linkage part numbers due to excessive steering wheel play p. 115
Check the steering exploded view on page 115 for exact rod and tube part numbers. Cross-reference your chassis components against the index to confirm fitment. Verify the front wheel tire size matches the 6-12B spec listed on page 172 for proper clearance.
Manual Section: SteeringCannot find replacement internal O-rings and component part numbers for a leaking injection pump p. 31
Open the injection pump component breakdown on page 31 to identify correct internal seals and springs. Order factory part numbers directly from the index. Confirm the complete replacement assembly against the 2.1 kgf injection pump weight specification on page 32.
Manual Section: Injection PumpMissing exploded diagrams to order internal rear drive components after hearing loud drivetrain grinding noises p. 87
Turn to the rear differential assembly breakdown on page 87 for correct bearing and shim part numbers. Match each number to your tractor build sheet exactly. Double-check that you are ordering the right ring and pinion set for the 6-37T rear differential bevel gear ratio shown on page 88.
Manual Section: Rear DifferentialUnsure which fuel filter housing assembly to order after experiencing hard starting in cold weather p. 147
Pull up the fuel filter diagram on page 147 to identify bowl, element, and O-ring part numbers. Compare the visual breakdown against your existing housing to confirm fitment. For related top-end components, note the cylinder head weight is 9.5 kgf as specified on page 12.
Manual Section: Fuel FilterFrequently Asked Questions
What are the replacement specifications for steering rods?
Several steering rod components are listed with part numbers and weights. The "ASSY ROD,TIE" is part number 67491-56500, weighing 1.08 kgf (2.376 lb). The left tie rod end (67121-56520) weighs 0.24 kgf (0.528 lb), and the right tie rod end (67121-56530) weighs 0.23 kgf (0.506 lb).
What are the replacement specifications for ball bearings?
Ball bearing specs are listed with part numbers, quantities, and weights. Part number 08153-06004 weighs 0.07 kgf (0.154 lb), quantity 1. A second bearing, part number 08101-06204, weighs 0.102 kgf (0.2244 lb), also quantity 1.
Is this Kubota B6200D Parts Catalog a digital download?
Yes. Instant PDF download. The full 198-page searchable Parts Catalog is available immediately after payment. Works on laptop, tablet, or phone right in the shop.
Is this Kubota B6200D Parts Catalog printable?
Zero restrictions. Print individual pages, full chapters, or the entire catalog. The PDF is completely unlocked.
Are hydraulic system diagrams in this Kubota B6200D Parts Catalog?
This is a parts catalog, so it shows exploded parts diagrams rather than circuit schematics. It includes detailed exploded views of the hydraulic components — pump, control valve, cylinder, and oil lines — with OEM part numbers, not wiring-style circuit diagrams.
Document Quality
This document is a native digital PDF, allowing you to search and copy the full text content easily. The text throughout is crisp and clear, ensuring excellent readability on all pages. Diagrams and illustrations are primarily raster images, appearing as scanned drawings or photos, but their labels are consistently readable. The pages are generally clean with no significant scan artifacts, stains, or skewed content. There are no notable blank or filler pages beyond the initial instructional pages and the final "Image Not Available" page for accessories.
Reviews
There are no reviews yet.