Looking for a Kubota L295DT parts catalog PDF with genuine factory numbers? This 219-page OEM reference (#100K0125) runs the whole tractor, crankcase to 3-point hitch. It holds 107 pages of illustrated parts lists across every major system, plus 12 pages of engine diagrams that break the injection pump, nozzle holder, and dynamo down to individual parts. Twelve drivetrain sections cover the spiral bevel gears, differential, and rear axle; another 12 hydraulic sections detail the control valve, relief valve, and draft control valve at component level. Steering shim plates run from 1.5+0.035/0.015mm to 1.5+0.155/0.135mm, each with its own OEM reference number. No more cross-referencing three aftermarket sites to find a part that actually fits. Bookmarked and keyword-searchable, the file opens on any device and puts the factory number in front of you in seconds.
What's Inside This Kubota L295DT Parts Manual
| System | Pages | Key Topics |
|---|---|---|
| Crankcase | 5-6 | Plug, Cap Sealing, Pin Straight, Pipe Water, Liner Cylinder, Gasket, O Ring |
| Oil Pan | 7-8 | Gasket Oil Pan, Bolt, Plug, Gasket, Filter Oil, O Ring, Washer Spring |
| Piston and Crankshaft | 9-11 | Piston, Crankshaft, Piston Ring, Connecting Rod |
| Main Bearing Case | 12-13 | Assy Case Main Brg, Bolt, Washer Lock, Washer Plain, Gasket, Cover Bearing, Seal Oil |
| Fly Wheel | 14-15 | Comp.flywheel, Gear Ring, Bolt Flywheel, Washer Flywheel, Comp.housing F-w., Pin Straight, Plug, Cover |
| Cylinder Head | 16-17 | Hook Engine, Bolt, Stud, Nut, Washer Spring, Comp.cylinder Head, Cap Sealing |
| Valve and Rocker Arm | 18-19 | Valve, Rocker Arm, Valve Inlet, Valve Exhaust, Spring Valve, Retainer Valve Sp., Collet Valve Spring, Seal Valve Stem |
| Nozzle Holder and Glow Plug | 20-21 | Nozzle Holder, Glow Plug, Pipe Injection, Clamp Pipe, Screw With Washer, Cover Injection Pump, Gasket Pump Cover, Bolt |
| Nozzle Holder [Component Parts] | 22-23 | Nozzle Holder, Nut, Joint, Washer Plain, Washer Adjusting, Spring Nozzle, Piece Distance, Push Rod |
| Cylinder Head Cover | 24-25 | Gasket Head Cover, Nut Head Cover, Plug Oil Filler, Holder Decomp.wire, Spring Decompress, Comp.shaft Decomp., Washer Head Cover |
| Breather | 26-27 | Plate Element, Element Breather, Oil Shield Breather, Stud, Joint Breather Pipe, Clamp Pipe, Pipe Breather |
| Inlet Manifold | 28-29 | Gasket In-manifold, Bolt, Washer Spring, Washer Plain |
| Air Cleaner | 30-31 | Body Air Cleaner, Cover Air Cleaner, Cover Baffle, Assy Nut Wing, Assy Band Aircleaner, Assy Element Cleaner, Washer With Rubber |
| Air Cleaner (Double) | 32-33 | Assy Cleaner Air, Body Air Cleaner, Cover Air Cleaner, Cover Baffle, Assy Nut Wing, Assy Band Aircleaner, Assy Element Outer, Label Element A/c |
| Exhaust Manifold | 34-35 | Manifold Exhaust, Gasket Ex-manifold, Stud, Washer Spring, Nut |
| Muffler | 36-37 | Band Muffler, Pipe Muffler, Band Pipe, Flange Muffler, Gasket, Assy Muffler Upward |
| Under Muffler | 38-39 | Assy Muffler Under, Pipe Muffler, Gasket, Muffler, Band Muffler, Support Muffler, Collar |
| Camshaft | 40-41 | Tappet, Push Rod, Assy Camshaft, Plug Pin, Screw Set, Gear Camshaft, Key Feather |
| Gear Case | 42-43 | Plug Pin, Cap Sealing, Pipe Water, O Ring, Pin Start Spring, Pin Straight, Gasket Gear Case |
| Oil Filter [Component Parts] | 44-45 | Assy Filter Oil, Assy Cover Oil Filte, Cover, Assy Valve Safety, Valve Safety, Spring, O Ring, Plug |
| Water Pump | 46-47 | Assy Pump Water, Shaft Water Pump, Impeller Water Pump, Set Seal, Assy Seal Mechanical, Bearing Ball, Cir-clip External, Cir-clip Internal |
| Water Flange | 48-49 | Flange Water, Pipe Water Return, Gasket Water Flange, Band Pipe, Cover Thermostat, Assy Thermostat |
| Injection Pump and Fuel Camshaft | 50-51 | Injection Pump, Fuel Camshaft, Assy Pump, Shim, Bolt, Stud, Nut, Washer Spring |
| Injection Pump [Component Parts] | 52-53 | Assy Pump Injection, Plate Adjusting, Spring Deliv.valve, Gasket Deliv.valve, Valve Delivery, Plunger Pump, Screw Air Breeder, Rack Control |
| Speed Control Plate | 54-55 | Apparatus Fuel Limit, Nut Lock, Gasket, Nut Cap, Assy Apparatus I/d., Assy Bolt Adjusting, Spring, Lever Speed Control |
| Governor | 56-57 | Comp.lever Governor, Assy Lever Fork, Comp.lever Fork, Lever Fork, Shaft Fork Lever, Bolt Lever Shaft, Holder Fork Lever, Spring Start |
| Radiator | 58-59 | Cap Radiator, Pipe Water Over Flow, Shroud Fan, Cock Drain, Net Radiator, Pipe Water, Washer Spring |
| Dynamo and Front Pto(Option) | 60-61 | Dynamo, Front Pto, Fan, Pulley Fan Drive, Key Feather, Cover Belt Lh, Flange Front Pto |
| Dynamo [Component Parts] | 62-63 | Assy Dynamo, Washer Spring, Pulley Dynamo, Fan Dynamo, Frame Drive End, Bearing Ball, Plate Retainer, Armature |
| Hand Accelerator | 64-65 | Lever Hand Accel., Grip Lever, Spring, Link Accel., Rod Accel., Joint Rod, Washer Plain, Pin Split |
| Fuel Tank | 66-67 | Assy Tank Fuel, Assy Cap Fuel Tank, Assy Cock Fuel, Bush Fuel Tank, Support Fuel Tank, Bracket, Rubber Protector, Cap Rubber |
| Fuel Filter | 68-69 | Assy Pipe Fuel, Clip Pipe, Assy Filter Fuel, Cover Filter, Element Filter, Plug Filter Breather, O Ring, Mark Form |
| Starter | 70-71 | Assy Starter, Nut, Washer Spring, Bolt, Stud |
| Starter [Complnent Parts] | 72-73 | Assy Starter, Yoke, Armature, Gasket, Holder Brush, Spring Brush, Switch Magnetic, Gear |
| Starter [Component Parts] | 74-75 | Assy Starter, Assy Yoke, Assy Armature, Assy Clutch, Frame Drive End, Assy Switch Hagnetic, Frame End, Assy Holder Brush |
| Battery | 76-77 | Support Air Cleaner, Stay Support A/c, Band Air Cleaner, Cushion Air Cleaner, Plate Shutter, Battery Dry, Cushion, Support Battery |
| Panel 1 | 78-79 | Panel, Bolt, Cushion, Screw Pan Head, Washer Plain, Washer Spring, Nut, Guide Rh |
| Panel 2 | 80-81 | Assy Switch Main, Nut Ring, Key Main Switch, Switch Starter, Assy Knob, Cap Rubber, Switch Winker, Thermometer Water |
| Panel 3 | 82-83 | Switch Safety, Holder Switch, Assy Regulator, Assy Box Fuse, Unit Flasher, Switch Stop, Horn, Assy Hazard Unit |
| Light [Except Europe] | 84-85 | Assy Light Head, Body, Lens, Bulb, Reflector, Rubber Dusting, Comp.cord Socket, Clip |
| Work Light | 86-87 | Assy Light Working, Bulb Lamp, Lens, Stay Lamp, Bolt, Washer Spring, Washer Plain, Nut |
| Clutch | 88-89 | Comp.disk Clutch, Assy Plate Pressure, Bolt Reamer, Bolt, Washer Spring |
| Clutch Lever | 90-91 | Lever Clutch, Fork, Key Fork, Bolt, Hub Clutch Release, Nipple Grease, Bearing Thrust Ball, Spring |
| Clutch Pedal | 92-93 | Pedal Clutch, Bush, Nipple Grease, Spring, Piece Distance, Joint, Pin Joint, Washer Plain |
| Clutch Housing | 94-95 | Housing Clutch, Plug Blind, Gauge Oil, Plug Drain, Cover Housing, Gasket Housing, Spacer |
| Transmission Case | 96-97 | Case Transmission, Plug Blind, Plug, Gasket, Retainer, O Ring, Bolt, Washer Spring |
| Main Shaft | 98-99 | Shaft Main, Seal Oil, Cir-clip External, Washer, Bearing Ball, Gear, Collar, Bearing Needle |
| Counter Shaft | 100-101 | Countershaft, Washer, Bearing Ball, Collar Thrust, Boss Spline, Cir-clip, Wire, Gear |
| PTO Counter Shaft | 102-103 | Countershaft Pto, Shaft Pto, Case Bearing, Clutch Oneway, Case Clutch, Clutch |
| Reverse Shaft | 104-105 | Shaft Reverse, Screw Set, Washer With Rubber, Assy Gear, Bush |
| Main Gear Shift Lever and PTO Gear Shift Lever | 106-107 | Main Gear Shift Lever, Pto Gear Shift Lever, Cover Gear Shift, Gasket, Plug, Bolt, Washer With Rubber, Bracket Gear Shift |
| Main Shift Fork | 108-109 | Fork Shift, Rod Fork, Ball, Spring, Pin Spring, Piece Neutral |
| Hi-Lo Gear Shift Lever | 110-111 | Fork Shift, Shaft Fork, Pin Snap, Screw Set, Washer With Rubber, Ball, Spring, Lever Shift |
| Creep Gear Shift Lever | 112-113 | Cover, Gasket, Stud, Bolt, Washer Spring, Nut, Label |
| PTO Shift Fork | 114-115 | Fork Shift, Shaft Fork, Screw Set, Washer With Rubber, O Ring, Ball, Spring, Lever Pto |
| Spiral Bevel Gear | 116-117 | Assy Gear Bevel, Bearing Roller, Cir-clip External, Gear, Bearing Taper-roller, Nut, Case Bearing, Shim |
| Differential System 1 | 118-119 | Assy Differential, Case Differential, Cover Diff.case, Pin Straight, Shaft Diff.pinion, Assy Pinion Differen, Bush, Washer Diff.pinion |
| Differential System 2 | 120-121 | Case Diff.bearing Rh, Case Diff.bearing Lh, Shim, Bearing Taper-roller, Bolt, Washer Spring, Shaft Diff Gear Rh, Shaft Diff Gear Lh |
| Diff.Lock Pedal | 122-123 | Fork Shift, Spring, Bolt, Pedal Diff.lock, Bracket, Cam Diff.lock, Pin Joint, Washer Plain |
| Rear Axle | 124-125 | Axle Rear, Seal Oil, Bearing Ball, Cir-clip Internal, Collar, Washer, Gear, Nut |
| Axle Case | 126-127 | Axle Case Rh, Axle Case Lh, Plug, Washer With Rubber, Pin Straight, Bolt, Stud, Washer Plain |
| Rear Wheel(12.4-24) | 128-129 | Assy Rear Wheel, Tire, Tube, Cap Valve, Core Valve, Housing Valve Core, Nut Rim, Rim |
| Brake | 130-131 | Case Brake, Gasket, Pin Straight, Plate Cam Lh, Plate Cam Rh, Disk Brake, Plate, Seat Ball |
| Brake Pedal | 132-133 | Shaft Brake Pedal, Support Pedal Shaft, Bush, Nipple Grease, Bolt, Collar, Cir-clip External |
| Parking Brake Lever | 134-135 | Ratchet, Spring, Bolt, Washer Plain, Nut, Guide Ratchet, Rod Ratchet |
| Front Axle Bracket | 136-137 | Plug, Stud, Bolt, Washer Spring, Nut, Support Radiator Rh, Support Radiator Lh |
| Diff.Gear Shaft | 138-139 | Seal Oil, Shaft Bevel Gear, Collar Seal, Bearing Ball, Collar Split, Cir-clip Internal, Axle, Collar Thrust |
| Diff.Gear Case | 140-141 | Case Gear, Washer With Rubber, Collar Seal, Case Pinion Bearing, Assy Bearing Taper R, Case Differential, Shaft Diff.pinion, Assy Pinion Diff. |
| Front Axle Support | 142-143 | Support Rh, O Ring, Support Lh, Plug, Washer With Rubber, Pin Straight, Bolt, Washer Spring |
| Propeller Shaft | 144-145 | Pin Center, O Ring, Collar Thrust, Shim, Bolt, Washer Spring, Pin Straight |
| Drive Case | 146-147 | Case Drive, Pin Straight, Cover Pto, Gasket, Shaft, Bearing Ball, Cir-clip Internal, Seal Oil |
| Front Wheel(7-16) | 148-149 | Front Wheel, Tube, Cap Valve, Core Valve, Tire, Wheel, Washer Plain, Nut |
| Drag Linkage | 150-151 | End Drag Link, Pin Knuckle, Gasket, Support Knuckle Rh, Bush, Shim, O Ring, Comp.link Drag |
| Tie Rod | 152-153 | Arm Knuckle Rh, Arm Knuckle Lh, Bolt, Assy Rod Tie, Rod Tie, Assy End Tie Rod, Nut, Pin Split |
| Manual Steering | 154-155 | Assy Steering, Pin Straight, Bolt, Assy Handle Strg., Cap Handle, Washer Spring, Nut, Holder Post |
| Manual Steering [Component Parts] | 156-157 | Assy Steering, Box Gear, Shaft Sector, Comp.nut Ball, O Ring, Spacer, Pin Spring, Rivet |
| Hydraulic Pump | 158-159 | Key Woodruff, Boss Spline, Washer, Nut, Gear, Race Inner, Bearing Needle |
| Hydraulic Pump [Component Parts] | 160-163 | Pump Hydraulic, Assy Gear And Bush, Seal Oil, O Ring, Key Woodruff, Ring Seal, Ring Support, Cover |
| Hydraulic Oil Line | 164-165 | Pipe Inlet, O Ring, Bolt, Washer Spring, Comp.pipe Delivery, Band Pipe, Pin Band |
| Hydraulic Oil Filter | 166-167 | Comp Pot Filter, Bolt, Washer Spring, Washer Plain, Pipe Rubber, Clamp, Filter Oil, Cover Filter |
| Control Valve | 168-169 | Valve Control, Joint Spool, Cir-clip External, Nut, Bolt, Washer Spring, Lever Spool Drive, Arm Control |
| Control Valve [Component Parts] | 170-171 | Valve Control, Spring, Valve Check, O Ring, Seat, Poppet, Plug Seat, Valve Unload |
| Relief Valve | 172-173 | Valve Relief, Spacer Valve, Bolt, Stud, Nut, Washer Spring, O Ring, Plug |
| Relief Valve [Component Parts] | 174-175 | Assy Valve Relief, Seat, Poppet, Spring, Plug, Shim, O Ring |
| Draft Control Valve | 176-177 | Guide Hyd.lever, Stopper, Nut, Washer Spring, Assy Valve Draft Con, Lever Feed Back, Spacer, O Ring |
| Draft Control Valve [Component Parts] | 178-179 | Draft Control Valve, Assy Valve Draft Con, Cover, Plug, Spring, O Ring, Shaft, Arm |
| Hydraulic Cylinder | 180-181 | Cylinder Hyd., Pipe Breather, Assy Cover Hyd.Cyl., Collar Adjusting, Screw Adjusting, Grip, Ring Back Up, Elbow |
| Lift Arm | 182-183 | Liner Cylinder, Piston Hyd., Shaft Hyd.arm, Arm Hydraulic, Rod Hyd., Link Control, Arm Lift, Pin Lift Rod |
| 3-Point Linkage | 184-186 | Assy Link Top, Link Top, Joint Top Link, Pin Spring, Pin Set, Comp.link Lower, Assy Adjuster, Rod Lift Lower |
| Top Linkage Bracket | 187-188 | Comp Bracket Link, Bush, Pin Straight, Nipple Grease, Bolt, Washer Spring, Rod Draft Control, Turnbuckle |
| Drawbar and Hitch | 189-190 | Frame Drawbar, Hitch, Bolt, Washer Spring, Link Support, Drawbar, Nut, Pin Joint |
| PTO Shaft Protector | 191-192 | Protector Shaft Pto, Collar, Bolt, Washer Spring |
| Hood (Bonnet) | 193-194 | Comp.bonnet, Cover Bonnet, Cushion, Support Bonnet Rh, Support Bonnet Lh, Hook, Grille Light, Grille Lamp |
| Rearview Mirror | 195-196 | Assy Mirror Rearview, Mirror Rearview, Support R.mirror, Holder, Washer Spring, Nut, Bolt |
| Upper Frame | 197-198 | Cover Fan, Frame Upper, Bolt, Washer Plain, Screw With Washer |
| Fender | 199-200 | Comp.fender Rh, Comp.fender Lh, Bracket Fender Rh, Bracket Fender Lh, Stay Fender Rh, Stay Fender Lh, Spacer Fender, Balustrade |
| Fendr | 201-202 | Comp.fender Rh, Comp.fender Lh, Bracket Fender Rh, Bracket Fender Lh, Stay Fender Rh, Stay Fender Lh, Spacer Fender |
| Tools Case | 203-204 | Case Tools, Bolt, Nut, Stay Tools Case, Washer Spring |
| Seat | 205-206 | Assy Seat, Assy Suspention Seat, Support Seat, Arm, Spring Seat, Bolt Adjust, Pin, Cushion |
| Seat [Option] | 207-208 | Suspenshion Seat Adj, Assy Seat, Seat Adjust Rh, Seat Adjust Lh, Cushion, Pin Split, Screw With Washer, Support Seat |
| S.M.V.Emblem Bracket | 209-210 | Bkt.triangle Plate, Screw Pan Head, Nut, Washer Spring, Washer Plain |
| Step | 211-212 | Comp.step Rh, Spring, Step Lh, Collar, Bolt, Washer Spring, Tube Vinyl, Seat Step |
| Label 1 | 213-214 | Side Kubota Rh, Side Kubota Lh, Model Rh, Model Lh, Drain, Kubota, Oil, Hi-lo Shift |
| Label 2 | 215-218 | Name Plate, Label Pto, Label Instruction, Label Pedal, Mark Spacer, Label Engine Stop, Label Drain Caution, Label One Way Clutch |
| Accessories and Service Parts | 219 | Manual Instruction, List Parts, Assy Tools Standard, Screw Driver, Spanner, Wrench Offset, Pliers, Squeezer Oil |
Quick Reference Specifications
| Specification | Value | Page |
|---|---|---|
| SHIM ADJUSTING (1.5+0.035/0.015MM) | 0.002 kgf | p. 157 |
| SHIM ADJUSTING (1.5+0.065/0.045MM) | 0.002 kgf | p. 157 |
| SHIM (REF.No 080) | 0.5MM | p. 139 |
| SHIM (REF.No 040) | 0.2MM | p. 141 |
| OIL PAN (REF.No 010) | 11.4 kgf | p. 8 |
| COMP.CRANKCASE Weight | 55 kgf | p. 6 |
| LINER CYLINDER Weight | 0.57 kgf | p. 6 |
| OIL PAN Weight | 11.4 kgf | p. 8 |
| COMP.FLYWHEEL Weight | 15.9 kgf | p. 15 |
| COMP.CYLINDER HEAD Weight | 15.1 kgf | p. 17 |
| ASSY PUMP WATER Weight | 1.95 kgf | p. 47 |
Kubota L295DT Common Problems This Manual Covers
Kubota L295DT power steering leaking, need correct seal part numbers for the steering gear p. 156
Start with the Manual Steering [Component Parts] exploded view on page 156. The steering gear oil seals appear at REF.No 170 and REF.No 200 on page 157. Adjusting shims come in increments from 1.5+0.035/0.015mm up to 1.5+0.155/0.135mm. Match your serial number range against the parts list before ordering to confirm fitment.
Manual Section: Manual Steering [Component Parts]Brake assembly seized during restoration, need part numbers for all brake hardware and linkage components p. 130
Open the Brake exploded view on page 130 and match each component to its reference number in the parts list. The Brake Pedal diagram on page 132 and Parking Brake Lever on page 134 carry the linkage hardware part numbers. Cross-reference every reference number against the Parts Number List before you place the order.
Manual Section: BrakeClutch slipping on high-hour tractor, can't identify which disc and pressure plate part numbers to order p. 88
Pull up the Clutch exploded view on page 88 and locate the disc and pressure plate by reference number in the parts list. Housing-side components sit in the Clutch Housing diagram on page 94. Linkage parts live in the Clutch Lever and Clutch Pedal diagrams on pages 90 and 92. Confirm all ref numbers against the Parts Number List before ordering.
Manual Section: ClutchFront axle shimming unclear, need correct shim part numbers and thickness options for differential gear shaft p. 138
Check the Diff.Gear Shaft parts list on page 138. Shims at REF.No 080 come in 0.1mm, 0.2mm, and 0.5mm thicknesses. For the gear case, page 140 lists extra shim sets at REF.No 040, 050, and 060 in 0.1mm and 0.2mm sizes. Tie your serial number range to the correct parts column before ordering.
Manual Section: Diff.Gear ShaftHydraulic pump leaking oil, need the right pump seal part numbers from the component parts list p. 160
Locate the Hydraulic Pump [Component Parts] diagram, which starts on page 160. Oil seals are listed at REF.No 030 on page 161 and REF.No 070 on page 163, each weighing 0.007 kgf. Also check the Hydraulic Oil Filter assembly on page 166: the filter pot (REF.No 010, 1.2 kgf) and filter cover (REF.No 080) are separate line items, each needing its own part number.
Manual Section: Hydraulic Pump [Component Parts]Can't match the right fuel filter and oil filter part numbers before ordering service parts p. 68
Turn to the Fuel Filter exploded view on page 68. The complete filter assembly (REF.No 100, 0.555 kgf) and the filter element (REF.No 120) show up as separate line items on page 69. For the engine oil filter, see page 44, where the cartridge (REF.No 130, 0.358 kgf) stands alone. Verify each reference number before ordering.
Manual Section: Fuel FilterFrequently Asked Questions
What are the replacement specifications for Brake components?
Each Brake component is listed with its part number, quantity, and weight. The DISK BRAKE, for instance, is Part No. 37150-28200, quantity 4, weight 0 kgf (0 lb). The CASE BRAKE is Part No. 37300-28150, quantity 2, weight 6.9 kgf (15.18 lb).
What are the replacement specifications for Clutch parts?
Clutch parts come with a part number, quantity, and weight apiece. The COMP.DISK CLUTCH is Part No. 35290-14300, quantity 1, weight 0 kgf (0 lb), while the ASSY PLATE PRESSURE is Part No. 37300-14500, quantity 1, weight 4.5 kgf (9.9 lb).
Does this manual help me find the correct oil seal part numbers for a leaking Kubota L295DT power steering?
Yes. The Manual Steering [Component Parts] exploded view starts on page 156, and the steering gear oil seals are called out at REF.No 170 and REF.No 200 on page 157. The catalog also lists adjusting shims in increments from 1.5+0.035/0.015mm up to 1.5+0.155/0.135mm, so you can match the right shim thickness. Confirm your serial number range against the parts list before ordering (page 156).
Where do I find the disc and pressure plate part numbers for a slipping clutch on a high-hour L295DT?
Open the Clutch exploded view on page 88 and locate the disc and pressure plate by their reference numbers in the parts list. Housing-side components are in the Clutch Housing diagram on page 94, while the linkage parts are split across the Clutch Lever and Clutch Pedal diagrams on pages 90 and 92. Confirm every reference number against the Parts Number List before ordering (page 88).
What shim thickness options are listed for shimming the L295DT front axle differential?
The Diff.Gear Shaft parts list on page 138 shows shims at REF.No 080 in 0.1mm, 0.2mm, and 0.5mm thicknesses. For the gear case, page 140 lists additional shim sets at REF.No 040, 050, and 060 in 0.1mm and 0.2mm sizes. Tie your serial number range to the correct parts column before ordering (page 138).
Can I identify the fuel filter and engine oil filter parts for the L295DT in this catalog?
Yes. The Fuel Filter exploded view is on page 68, and the complete filter assembly (REF.No 100) and the filter element (REF.No 120) appear as separate line items on page 69. For the engine oil filter, see page 44, where the cartridge is listed on its own at REF.No 130. Verify each reference number before ordering (page 68).
What format is this Kubota L295DT manual in?
Immediate download of the full 219-page searchable Parts Catalog. Open it on any device, whether that's the laptop at your desk or your phone out in the field.
Can I print this Kubota L295DT manual?
No restrictions at all. Print individual pages, full chapters, or the entire manual. The PDF is completely unlocked.
Document Quality
This document is a mix of native digital and scanned content. You can search and copy text from the item list pages, which have crisp and clear text. The diagrams and illustrations are scanned images with some jagged lines and faint background noise, but their labels and numbers remain readable. Overall, the pages are clean with no significant stains or skewed content.
Reviews
There are no reviews yet.