Need the correct OEM part numbers for your Kubota RC60-82H mid-mount mower? This 15-page parts catalog maps every assembly: joint, gear box, spindle and blade, deck and front wheel, rear wheel, and the main stay linkage. Exploded-view diagrams place each component in position with its part number listed alongside, so you can pin down the exact piece before calling your dealer. Cross-reference the standard blade (70722-34330, 0.99 kgf) or the low-suction blade (70722-99020, 0.95 kgf) against your worn part to confirm the order. Wrong part, wrong trip, wasted afternoon. Bookmarks drop you straight onto the gear box or spindle pages instead of scrolling, and the file opens on any device so you can match your part and place the order from the shop floor.
What's Inside This Kubota RC60-82H Parts Manual
| System | Pages | Key Topics |
|---|---|---|
| Joint | 4-5 | Assy Joint, Universal, Yoke, Cross, Nipple, Grease, Pin |
| Gear Box | 6-7 | Case, Bevel, Pinion, Gear, Bevel 19, Bearing, Ball, Oil |
| Spindle and Blade | 8-9 | Pulley, Spring, Tension, Blade, Retainer Blade, Kit Blade, Holder |
| Deck and Front Wheel | 10-11 | Deck, Mower, Assy Cover, Lh, Dust, Front, Front Wheel Lh, Front Wheel |
| Rear Wheel | 12-13 | Bracket, Rear, Lever, Gauge, Cover, Arm, Wheel |
| Main Stay | 14-15 | Lh Front, Rh Front, Lift Link, Rod, Support, Lift Lh, Joint, Assy Chain |
Every system also includes shaft.
Quick Reference Specifications
| Specification | Value | Page |
|---|---|---|
| Blade Part Number | 70722-34330 | p. 9 |
| Blade Weight | 0.99 kgf | p. 9 |
| Arm, Lift Part Number | 70722-61170 | p. 15 |
| Arm, Lift Weight | 1 kgf | p. 15 |
| Shaft, Blade Part Number | 70722-34530 | p. 9 |
| Shaft, Blade Weight | 0.52 kgf | p. 9 |
| Belt 110 Part Number | 70722-34710 | p. 9 |
| Belt 110 Weight | 0.47 kgf | p. 9 |
| Deck Belt Part Number | 70722-34710 | p. 9 |
| Deck Belt Weight | 0.47 kgf | p. 9 |
| Front Wheel Part Number | 70722-42110 | p. 11 |
| Front Wheel Weight | 1.9 kgf | p. 11 |
Kubota RC60-82H Common Problems This Manual Covers
Kubota RC60-82H mower blade part number needed, standard vs. low-suction option unclear p. 9
Check the Spindle and Blade parts list on page 9. The standard blade is #70722-34330 at 0.99 kgf each; for low-suction conditions, switch to #70722-99020 (0.95 kgf). Replacing all three at once? Order the full blade kit, #70722-99010, or the low-suction kit #70722-99030.
Manual Section: Spindle and BladeDrive belt snapped under the deck, need the correct replacement belt part number p. 9
Open the Spindle and Blade list on page 9 and find the Belt 110 entry: the replacement is #70722-34710 at 0.47 kgf. Match the routing in the exploded diagram on page 8 before you order, and confirm you want the single main belt rather than a full blade kit.
Manual Section: Spindle and BladeTwo pulleys visible under the deck, unsure which idler or tension pulley to order p. 9
Match your pulley position to the numbered diagram in the Spindle and Blade exploded view on page 8. The fixed idler is Pulley 1, #70732-33550; the spring-loaded Pulley, Tension 2 is #70720-69212 at 0.97 kgf. Pin down your position first, because both share the same belt path but are not interchangeable.
Manual Section: Spindle and BladeFront caster wheels worn flat, need the correct deck wheel part number to order p. 11
Locate the Deck and Front Wheel list on page 11. The front deck caster wheel is #70722-42110 at 1.9 kgf. Sourcing other deck hardware too? Note that the mower deck assembly on page 11 splits at S.No. 13801, so confirm your serial before ordering surrounding bracket parts.
Manual Section: Deck and Front WheelParts list shows two rear wheel versions split by serial number, correct fitment unclear p. 13
Pull the serial number plate on your deck frame, then compare it against the Rear Wheel list on page 13. The breakout splits at S.No. 13809: units at or above it use a different rear wheel assembly, listed at 2.1 kgf. Order from the matching serial row on page 12 to avoid a fitment mismatch.
Manual Section: Rear WheelFrequently Asked Questions
What are the replacement specifications for mower blades?
The standard blade is part number 70722-34330 at 0.99 kgf (2.178 lb). For a low-suction version, order 70722-99020 at 0.95 kgf (2.09 lb). A complete blade kit, part number 70722-99650, weighs 3.5 kgf (7.7 lb) and services REF.No.013 to 017.
How will I receive this Kubota RC60-82H Parts Catalog?
Download is immediate: the complete 15-page searchable Parts Catalog, ready on any device, laptop at your desk or phone out in the field.
Am I able to print pages from this Kubota RC60-82H manual?
None at all. The PDF is DRM-free, so print whatever sections you want to carry out to the shop. Standard letter or A4 paper works fine.
Document Quality
This document is a scanned PDF with an effective OCR layer, allowing you to search and copy the full text. The text throughout is crisp and easy to read. Diagrams and illustrations are raster images, appearing slightly pixelated on zoom, but their labels remain clear. The pages are clean, free of scan artifacts, stains, or skewed content. There are no notable blank or filler pages included.
Reviews
There are no reviews yet.