Sale!

New Holland MY16, MY17, MY19 Repair Manual — Wiring Diagrams

Original price was: $41.99.Current price is: $29.99.

-29%
Model: MY16 | MY17 | MY19
Type: Garden Tractor
166 Pages·24 MB·Searchable PDF·English·Print-Ready
  • Wiring Diagrams
  • Torque Specs
  • Multi-Level Bookmarks (2-level navigation)

Same factory service manual used by authorized dealer technicians.

Preview Sample Pages (PDF)
Add to Cart
New Holland MY16, MY17, MY19 service manual page detailing general safety instructions, warnings, and accident prevention tips.
New Holland MY16, MY17, MY19 Repair Manual — Wiring Diagrams
$41.99 Original price was: $41.99.$29.99Current price is: $29.99.

Instant Download 24/7

  • Works on PC, Mac, tablet, and phone.
  • Download once, keep forever

 

Guaranteed Safe Checkout
Visa Mastercard PayPal Apple Pay Google Pay

A garden tractor that cranks but will not fire, or a hydro that creeps in neutral, comes down to a spec you do not have. The New Holland MY16, MY17, MY19 repair manual PDF, OEM 87045362, puts the answer, 166 pages of it, in front of you. Wiring diagrams close out the book, tracing the relay, ignition switch, seat switch, brake switch, and electric PTO clutch circuits so you can chase a no-crank with a meter instead of a parts cannon. Transaxle work runs longest, from a troubleshooting checklist through brake adjustment, then chassis jobs: front wheel toe-in and tilt steering. Fill the hydrostatic transaxle with 3.8 quarts of SAE 20W-50, and check cranking amps before blaming the starter: 260CCA on the 16, 340CCA on the 17 and 19. Out in the barn, there is nobody to ask. Buy the bookmarked, text-searchable file once and it is yours for the life of the tractor.

What's Inside This New Holland MY16, MY17, MY19 Repair Manual

SystemPagesKey Topics
General Information1-16Think Safety First, Garden Tractor Specifications
Model/Serial Number Location17-18Model Plate, Serial Number Plate, Seat Assembly
Greasing and Lubrication19-20Grease Fittings, Wheel Hub, Front Axle, Spindles, Axle Pivot, Forward/Reverse Pedal
Transaxle21-64General Description, Troubleshooting Checklist, Brake Adjustment
Chassis65-98Front Wheel Toe-In, Steering Gear, Tilt Steering
Mower Decks99-100-
Electrical System101-166Relay, Solenoid, Ignition Switch, Electric PTO Clutch, PTO Switch, Seat Switch, Hourmeter, Brake Switch

Quick Reference Specifications

SpecificationValuePage
All Models
Standard Torque for Dry, Zinc Plated, and Steel Fasteners (Inch Series)10 ± 2 in-lb to 155 ± 25 ft-lbp. 12
Battery Type (MY16)260CCAp. 6
Battery Type (MY17, MY19)340CCAp. 6
Hydrostatic Transaxle LubricationSAE 20W-50 API Classification SH/CD Oilp. 10
Hydrostatic Transaxle Oil Capacity3.8 qts. (3.6 l)p. 10
Electric Start12V Bendix Drivep. 5
Center Section Screws525-700 lb-in [60-80 Nm]p. 48
PTO Clutch Coil Resistance2.40 ohms to 3.40 ohmsp. 110
PTO Clutch Current Draw3.5 amps or abovep. 111
Relay Coil Resistance70 to 90 ohmsp. 104
MY16
Engine Horsepower (MY16)16.0 HP@3600 RPMp. 5
MY17
Engine Horsepower (MY17)17.0 HP@3600 RPMp. 5

New Holland MY16, MY17, MY19 Common Problems This Manual Covers

New Holland MY16 starter clicks once but engine will not crank, headlights dim when key is turned

Check battery voltage and clean both cable terminals before condemning the starter. Load test the battery; the MY16 calls for a 260CCA battery per the specs on page 6. Then check start relay coil resistance following the procedure on page 104; a good coil reads 70 to 90 ohms. Replace the relay if it reads open.

Manual Section: Electrical System p. 104
Electric PTO clutch will not engage, mower blades stay stopped with switch pulled and engine running

Test the PTO clutch coil with an ohmmeter following the procedure on page 110; a good coil measures 2.40 to 3.40 ohms. Then check current draw with the engine running; the clutch should pull 3.5 amps or above. If resistance is fine but current is low, chase the PTO switch, seat switch, and wiring first.

Manual Section: Electric PTO Clutch Testing p. 110
Hydrostatic transaxle whines and loses drive on hills after twenty minutes of mowing

Check the transaxle oil level and top off with SAE 20W-50 API SH/CD oil as listed on page 10. If the oil is dark, drain and refill per the procedure on page 27; a full change takes 0.95 gal. (4.3 l). Purge air by cycling the pedal slowly both directions with the drive wheels off the ground.

Manual Section: Transaxle p. 27
Tractor creeps forward in neutral and brake pedal will not hold on a slope

Adjust the brake before buying parts. Block the front wheels, back off the adjustment nut, and set brake clearance to 0.020 in. (.508 mm) with a feeler gauge, following the procedure on page 32. Torque the brake nuts to 80 to 120 lb-in when finished, then confirm the pedal locks both rear wheels on a slope.

Manual Section: Brake Adjustment p. 32
Steering wheel has excessive free play and front tires wear unevenly and scrub during turns

Measure free play at the steering wheel rim; more than 0.5 to 1.0 in. (13 to 25 mm) means adjusting the steering gear eccentric, covered on page 87. Then set front wheel toe-in to 1/8 to 1/4 in. (3 to 6 mm) at the tie rod ball joints per page 66. Grease the spindles while the front end is up.

Manual Section: Chassis p. 87

Frequently Asked Questions

What are the torque specifications for fasteners on the MY16, MY17, and MY19 tractors?

Torque specifications vary by fastener grade and size. For example, a 1/4-20 UNC Grade 5 bolt requires 100 ± 10 in-lb, while a 3/8-16 UNC Grade 5 bolt requires 30 ± 3 ft-lb. Detailed tables for inch and metric series fasteners are provided on pages 12 and 13. p. 12

What is the transaxle oil capacity on the New Holland MY16 / MY17 / MY19?

The transaxle has an oil capacity of 3.8 quarts (3.6 liters). When performing a fluid change, the required volume is 0.95 gallons (116.5 oz or 4.3 liters) of 20W50 engine oil. p. 27

How often should the New Holland MY16 / MY17 / MY19 be greased?

The machine should be greased every 50 hours or yearly, whichever occurs first. You should grease more frequently if operating conditions are extremely dusty or sandy. p. 20

What is the correct transaxle brake adjustment procedure on the New Holland MY16 / MY17 / MY19?

To adjust the brake, remove the cotter pin and loosen the castle nut slightly. Insert a 0.020 inch (0.508 mm) feeler gauge between the outer brake pad and rotor disc, then tighten the adjusting nut until slight resistance is felt on the gauge. p. 32

What is the specified front wheel toe-in on the New Holland MY16 / MY17 / MY19?

The front toe-in measurement should be 1/8 inch to 1/4 inch (3 to 6 mm). This should be checked every 100 hours or once a year, whichever occurs first. p. 66

What format is this New Holland MY16 manual in?

Immediate download of the complete 166-page searchable Repair Manual. Access it on any device, from a laptop at your desk to a phone in the field.

Can I print a copy of this New Holland MY16 Repair Manual for the shop?

You can. The PDF is unlocked and carries no copy protection, so print the sections you want and keep the file as your backup.

BrandNew Holland
ModelMY16, MY17, MY19
Machine TypeGarden Tractor
Manual TypeRepair Manual
LanguageEnglish
FormatSearchable PDF (Digital Download)
Pages166
File Size24 MB
Manual No.87045362
Wiring DiagramsYes
Hydraulic SchematicsNo
Torque SpecificationsYes
Bookmarked / IndexedYes

Reviews

There are no reviews yet.

Be the first to review “New Holland MY16, MY17, MY19 Repair Manual — Wiring Diagrams”

Your email address will not be published. Required fields are marked *