The MD3 computer control system is the hardest ground in this 674-page Tigercat 860C service manual PDF (OEM ID 39183AENG), and around it sits a full shop reference for the 860C, 870C and L870C feller bunchers. Wiring diagrams and hydraulic schematics back the system chapters, which run from engine, cooling fan circuit and pilot system through track drive, boom functions, leveling, swing bearing, saw drive, and wrist and clamps. Torque tables and scheduled maintenance round it out. Fill the track drive gearbox with 6 L of oil, and calibrate the hydraulics to 300 mA minimum and 750 mA maximum with 500 mS start and stop slopes. When your pilot manifold filter is up for service, you work from the 500-hour replacement interval and the 1000-hour reverse flush interval. Bookmarks take you straight to each chapter, and the text layer finds a term like saw circuit anywhere in the file.
What's Inside This Manual
| System | Pages | Key Topics |
|---|
| Introduction | 4-5 | Serial Numbers, Machine Model Type, Harvesting Applications, Operator Manual, Service Manual, Preventive Maintenance Schedule |
| Standards ROPS, TOPS, FOPS, OPS | 6 | Modifications, Repairs |
| Non-Approved Field Product Changes | 7-8 | Unauthorized Attachments, Product Integrity, Stability, Factory Approved Options, Operating Weight, Warranty Nullification |
| Safety | 9-66 | General Safety Precautions, Operating Safety Precautions, Servicing Safety Precautions |
| Controls and Operation | 67-182 | Accumulation Mode Feature, MD3 Computer |
| Lubrication and Maintenance | 183-244 | Scheduled Maintenance |
| Hydraulic System | 245-284 | Hydraulic System Operation |
| Pilot System | 285-302 | Pilot System Components |
| Electrical and Computers | 303-400 | Computer Control System |
| Engine | 401-422 | Starting Engine |
| Cooling System | 423-448 | Cooling Fan Circuit |
| Track Drive | 449-516 | Drive Motor Description |
| Boom Functions | 517-544 | Boom System Description |
| Leveling | 545-580 | Leveling System Description |
| Swing | 581-620 | Swing Bearing |
| Saw Drive | 621-632 | Saw Circuit Description |
| Wrist and Clamps | 633-668 | Attachment Pump |
| Miscellaneous | 669-674 | Power Engine Door, Electric Pump Operated System, Hydraulic Hand Pump, Door Switch, Instrument Panel Switch, Manual Override |
Quick Reference Specifications
| Specification | Value | Page |
|---|
| Hydraulics adjustment | Min mA = 300, Max mA = 750, Start Slope = 500mS, Stop Slope = 500mS | p. 117 |
| Min Current default setting | 300 mA | p. 131 |
| Pilot manifold filter replacement interval | 500 hours | p. 217 |
| Pilot manifold filter reverse flush interval | 1000 hours | p. 217 |
| Track drive gearbox oil capacity | 6 L | p. 197 |
| Track shoe bolts ~ 3/4" UNF | 250 lbf•ft + 1/3 TURN (Torque-turn), 450 lbf•ft (Checking torque) | p. 502 |
| Track shoe bolts ~ M20 (F8 Forestry) | 260 lbf•ft + 1/3 TURN (Torque-turn), 550 lbf•ft (Checking torque) | p. 502 |
| Straight Thread O-Ring Boss Low Pressure with 37º (SAEJ514) -24 Fitting Torque | 154-170 lb.-ft. (209-230 Newton Meters) | p. 235 |
| Straight Thread O-Ring Boss Low Pressure with 37º (SAEJ514) -32 Fitting Torque | 218-240 lb.-ft. (296-325 Newton Meters) | p. 235 |
| Bottom roller bolts ~ 3/4" UNC | 310 lbf•ft | p. 502 |
| LS relief valve pressure | 345 bar (5000 psi) | p. 486 |
| Standard Fuel Tank Capacity | 946 L | p. 154 |