This Kubota Operator Manual covers the B6200HST and B7200HST tractors and their D850 and D950 diesel engines. In 56 pages it walks an owner through safe operation, the instrument panel and controls, the three-point hitch, wheels and ballast, and the day-to-day running of the machine.
The heart of the manual for most owners is the maintenance and troubleshooting content: daily checks, lubricant specifications, and service intervals for fuel, engine oil, and transmission fluid, plus adjustment procedures for the clutch, brake, and fan drive belt. When the tractor will not start or the drive feels weak, the troubleshooting section helps you find the cause. A wiring diagram is included for tracing electrical faults.
Complete the set for your B6200HST, B7200HST
- Repair Manual: Kubota B6200HST, B7200HST Workshop Manual (incl. Wiring)
What's Inside This Operator Manual
| System | Pages | Key Topics |
|---|---|---|
| Abbreviations List | Abbreviations Table, Common Abbreviations, Technical Definitions | |
| Safe Operation | Before Operating the Tractor, Operating the Tractor, Driving the Tractor on the Road, Stopping the Tractor, Operating the PTO, Using 3-Point Hitch, Servicing the Tractor | |
| Servicing of Tractor | Tractor Serial Number Location, Engine Serial Number Location, Recording Serial Numbers | |
| Specifications | Engine Specifications, Capacities, Tires, Dimensions, Weight, PTO Shaft, Clutch, Steering | |
| Specifications of Implement Limitations | Implement Limitations Table, Lower Link End Max. Loading Weight, Implement Weight, Trailer Loading Weight, Rotary Mower Specifications, Rotary Tiller Specifications | |
| Handling New Tractor | Operation During the Breaking-In Period, Changing Lubricating Oil for New Tractors, Read 'Safe Operation', Loading and Unloading | |
| Instrument Panel and Controls | Switches, Controls, Auxiliary Hydraulics | |
| Three-Point Hitch & Drawbar | Top Link, Lifting Rod, Check Chains | |
| Wheels, Tires and Ballast | Treads, Wheel Hub, Tires, Ballast, Toe-In | |
| Operating Instructions | Operating the Engine, Operating the Tractor, Pulling, Check During Driving, Directions for Operating | |
| Maintenance | Daily Check, Lubricants, Maintenance Check List | |
| Check and Maintenance | Fuel, Engine Oil, Transmission Fluid, Changing Front Axle Differential Case Oil, Changing Front Axle Gear Case Oil, Oiling and Greasing Points Before Starting, Radiator | |
| Adjustments | Fan Drive Belt, Clutch, Brake, Steering Wheel | |
| Troubleshooting | Engine Troubleshooting, Tractor Troubleshooting, Battery Troubleshooting | |
| Long-Term Storage | Long-Term Storage Procedures, Clutch Pedal Storage, Battery Storage, Tractor Covering, Muffler Protection, Smv Emblem, Drawbar | |
| Lubricant Specifications | Engine Oil, Transmission Oil, Other Lubricants, Kubota Lubricants | |
| Wiring Diagram | Wiring Diagram Overview, Color of Wire Harness, Wire Harness 1, Wire Harness 2, Wire Harness 3 |
Quick Reference Specifications
| Specification | Value | Page |
|---|---|---|
| Hydrostatic lever linkage adjustment | Ask your dealer for hydrostatic lever linkage adjustment or pressure adjustment. | p. 49 |
| Wheel hub bolts torque | 10-17 kgf·m (72-123 ft·lbs.) | p. 28 |
| Fuel filter cleaning interval | Every 100 hours | p. 33 |
| Fuel filter replacement interval | Every 400 hours | p. 36 |
| Air cleaner dust cup cleaning interval | Once a week (or everyday if dusty) | p. 45 |
| Air cleaner element replacement interval | Once yearly or after every sixth washing | p. 45 |
| Engine oil filter initial change interval | Initial 35 hours of use | p. 36 |
| Engine oil filter replacement interval | Every 150 service hours | p. 34 |
| Transmission case fluid capacity | 13.5ℓ (14.3 U.S. qts.) | p. 12 |
| Transmission fluid type | KUBOTA UDT fluid (Transmission-hydraulic fluid) | p. 47 |
| Grease type for king pins, center pin, brake pedal shaft, clutch release hub, seat adjuster, speed control pedal shaft | SAE multi-purpose type grease | p. 35 |
| Greasing interval for king pins, brake pedal shaft, center pin, speed control pedal shaft | Every 75 hours | p. 36 |
