The Hyster N30XMXDR3 service manual PDF takes the N30XMXDR3 and N45XMXR3 forklift trucks apart system by system across 540 pages, from the overhead guard to the HFK400 and GK master drive unit, steering, electrical and mast. Fault codes for the SEM traction motor controller sit with programmer handset operation and battery indicator readings, giving you a direct route from a fault code to its cause. Drive unit troubleshooting charts, exploded views, torque tables and maintenance checks back up the repair work on mast weldments, lift cylinders and reach carriages. Hold the lift and steering pumps to their 8.4 MPa (1200 psi) maximum, and measure traction motor brushes against the 20.00 mm wear length. For the electromagnetic brake job, the figures you need are a 2.40 mm minimum lining thickness and a 153.2 mm maximum drum inside diameter. Bookmarks jump to each system. A live text layer finds any figure, so your brake and brush jobs finish on Hyster's own numbers.
What's Inside This Manual
| System | Pages | Key Topics |
|---|
| General | 1 | Frame Weldment |
| Description | 1 | |
| Repairs - General | 1 | |
| Covers, Panels, and Plates | 2-6 | Replace Load Wheels |
| Overhead Guard Repair | 7-8 | Changes to Overhead Guard (Remove, Install) |
| Painting Instructions | 9-11 | Cleaning Solvents, Primer, Frame, Overhead Guard, Mast, Forks |
| Overhead Guard Repair | 12-12 | Overhead Guard Removal, Overhead Guard Installation, Safety Precautions |
| Painting Instructions | 13-16 | Surface Preparation, Paint Specifications, Safety Labels Replacement |
| Master Drive Unit (HFK400 and GK) | 19-46 | Drive Unit Maintenance, Traction Motor Removal, Gear Assembly, Troubleshooting |
| Steering System | 47-100 | Steering Control Unit, Steering Pump and Motor, Axle Assembly Repair, Caster Wheels |
| Electrical System and Traction Motor Controller | 101-288 | SEM Traction Motor Controller, Programmer Handset Operation, Fault Codes, Battery Indicators |
| Mast Description | 289-310 | Mast Weldments |
| Lift Cylinders | 311-324 | Lift Cylinder Repair |
| Mast Repair | 325-376 | |
| Reach Carriages | 377-426 | Reach Carriage Assembly |
| Metric and Inch (SAE) Fasteners | 427-446 | |
| Periodic Maintenance | 447-498 | Brake System |
| Capacities and Specifications | 499-512 | |
| Diagrams | 513-540 | |
Quick Reference Specifications
| Specification | Value | Page |
|---|
| Lift Pump Maximum Pressure | 8.4 MPa (1200 psi) | p. 506 |
| Steering Pump Maximum Pressure | 8.4 MPa (1200 psi) | p. 506 |
| Traction motor brush wear length | 20.00 mm | p. 479 |
| Lift pump motor brush wear length | 15.90 mm | p. 479 |
| Minimum brake lining thickness | 2.40 mm | p. 481 |
| Maximum allowable inside diameter of brake drum | 153.2 mm | p. 481 |
| Overhead Guard Capscrew Torque | 149 N•m (110 lbf ft) | p. 12 |
| MDU Drain Plug Torque | 22 N•m (16 lbf ft) | p. 24 |
| Traction Motor Capscrew Torque | 20 N•m (15 lbf ft) | p. 25 |
| Bevel Gear Capscrew Torque | 245 N•m (181 lbf ft) | p. 33 |
| Steering Pressure | 8.3 ±0.3 MPa (1200 ±50 psi) | p. 71 |
| Load Backrest Capscrew Torque | 102 N•m (75 lbf ft) | p. 385 |