Part of the Case IH Operator Manuals.
Two transmissions, the 24 x 24 Two-Speed Powershift and the 16 x 16 (17 x 16) Semi-Powershift, lead the controls coverage in this 396-page Case IH 1404 operator manual PDF (OEM ID 48096649), which then widens to the cab, instruments, differential lock and four wheel drive. Field operation spans rear and front PTO, electronic hitch control, load sensing remote valves, quick hitch, drawbars and ballasting. Service intervals run from the 10-hour daily check to 3600 hours/48 months, and fault finding covers engine, hydraulics, three-point hitch, brakes and electrical. Wheel fixings have exact figures. Torque disc to hub nuts to 210 Nm (155 lbf. ft.) with standard washers, and disc to rim nuts to 250 Nm (184 lbf. ft.). Connecting remote hydraulic equipment or setting your wheel track is the kind of job you bring to this book. Bookmarked, searchable pages take you to the 204 mm factory-fit hydraulic filter length, so the replacement you order matches first time.
What's Inside This Operator Manual
| System | Pages | Key Topics |
|---|---|---|
| General Information and Safety | 11-48 | To the Owner, Product Identification, Ecology and the Environment, Safety Precautions, Safety Decals, International Symbols, Airborne Noise Emission |
| Controls, Instruments and Operation | 49-140 | Cab, Seats, Handbrake, Throttle and Foot Controls, Instrument Console, Analogue/Digital Instruments, Two-Speed Powershift Transmission, Semi-Powershift Transmission |
| Field Operation | 141-270 | Important Information, Using Jump Leads, Starting the Engine, Stopping the Engine, Turn Assist, Rear Power Take-Off, Front Power Take-Off and Hydraulic Lift |
| Lubrication and Maintenance | 271-348 | Tractor Jacking Points, Guard Removal, Lubrication and Maintenance Chart, Servicing: When Warning Lights Illuminate, 10-Hour/Daily Service, 50-Hour Service, 100-Hour Service |
| Fault Finding | 349-358 | Introduction, Engine, Transmission - 24 X 24 Two-Speed Powershift, Transmission - 16 X 16 Semi-Powershift, Hydraulics, Rear Three-Point Hitch, Brakes, Cab |
| Accessories | 359-366 | Auxiliary Headlights, Battery Isolator Switch, Loader Subframe and Control Valve, Rear Remote Valve Zero Detent Kit, Front-End Loader Fixation Points |
| Tractor Specification | 367-386 | Vehicle Weights, Lubricant and Fluid Capacities, Engine, Fuel System, Cooling System, Transmission Options, Brakes, Rear Power Take-Off |
| 1St 50 Hour Service Sheets | 387-390 |
Quick Reference Specifications
| Specification | Value | Page |
|---|---|---|
| Power Beyond Selector Control tightening torque | 15Nm (11.0 lbf. ft.) | p. 201 |
| Disc to hub nuts (Standard washer) | 210 Nm (155 lbf. ft.) | p. 249 |
| Disc to rim nuts (Standard washer) | 250 Nm (184 lbf. ft.) | p. 249 |
| Intake filter locking ring torque | 50 Nm (36.8 lbs.ft.) | p. 309 |
| Original (factory fit) hydraulic filter length | 204mm | p. 272 |
| Original (factory fit) hydraulic filter diameter | 94.3mm | p. 272 |
| Fuel filter tightening torque | 15 Nm | p. 311 |
| 80 ltr fixed displacement pump maximum system pressure | 190 +/- 5 bar | p. 379 |
| Variable displacement pump maximum system pressure | 210 +/- 5 bar | p. 379 |
| Fuel Tank Capacity | 250 litres | p. 277 |
| Engine Oil Capacity (including filter) | 15 litres | p. 306 |
| Engine Idle Speed | 800 - 850 rpm | p. 332 |
